 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3 V, SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER FOR MOBILE COMMUNICATIONS FEATURES * SUPPLY VOLTAGE: VCC = 2.7 to 3.3 V * CIRCUIT CURRENT: ICC = 23.0 mA TYP at VCC = 3.0 V Gain, GP (dB) 30 UPC8181TB NOISE FIGURE, POWER GAIN vs. FREQUENCY VCC = 3.0 V 25 GP 20 * POWER GAIN: GP = 19.0 dB TYP at f = 0.9 GHz GP = 21.0 dB TYP at f = 1.9 GHz GP = 22.0 dB TYP at f = 2.4 GHz * MEDIUM OUTPUT POWER: PO(1dB) = +8.0 dBm TYP at f = 0.9 GHz PO(1dB) = +7.0 dBm TYP at f = 1.9 GHz PO(1dB) = +7.0 dBm TYP at f = 2.4 GHz * UPPER LIMIT OPERATING FREQUENCY: fU = 4.0 GHz TYP at 3 dB bandwidth (Standard value) * HIGH-DENSITY SURFACE MOUNTING: 6-pin super minimold package (2.0 x 1.25 x 0.9 mm) 5 15 10 NF 4 5 3 0 0.1 0.3 1.0 3.0 Frequency, f (GHz) DESCRIPTION NEC's UPC8181TB is a silicon Monolithic Microwave Integrated Circuit designed as an amplifier for mobile communications. This IC operates at 3 volts. The medium output power is suitable for RF-TX of mobile communication systems. This IC is manufactured using NEC's 30 GHz fmax UHS0 (Ultra High Speed process) silicon bipolar process. This process uses direct silicon nitride passivation film and gold electrodes. These materials can protect the chip surface from pollution and prevent corrosion/migration. This IC has excellent performance, uniformity, and reliability. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. APPLICATIONS * Buffer amplifiers for 1.9 GHz to 2.4 GHz mobile communication systems. ELECTRICAL CHARACTERISTICS (TA = 25C, VCC = VOUT = 3.0 V, ZS = ZL = 50) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GP PARAMETERS AND CONDITIONS Circuit Current (no signal) Power Gain, f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz UNITS mA dB MIN - 16.0 18.0 19.0 - - - - 28.0 27.0 26.5 UPC8181TB S06 TYP 23.0 19.0 21.0 22.0 4.5 4.5 4.5 4.0 33.0 32.0 31.5 MAX 30.0 22.0 24.0 25.0 6.0 6.0 6.0 - - - - NF Noise Figure, dB fU ISL Upper Limit Operating Frequency, 3 dB down below from gain at f = 0.1 GHz Isolation, GHz dB UPC8181TB ELECTRICAL CHARACTERISTICS (cont.) (TA = 25C, VCC = VOUT = 3.0 V, ZS = ZL = 50) PART NUMBER PACKAGE OUTLINE SYMBOLS PO(1dB) PARAMETERS AND CONDITIONS 1 dB Gain Compression Output Level, f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz Saturated Output Power Level, f = 0.9 GHz, PIN = -5 dBm f = 1.9 GHz, PIN = -5 dBm f = 2.4 GHz, PIN = -5 dBm Input Return Loss, f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz UNITS dBm MIN +5.5 +4.5 +4.5 - - - 4.5 7.5 8.0 6.0 7.0 9.0 UPC8181TB S06 TYP +8.0 +7.0 +7.0 +9.5 +9.0 +9.0 7.5 10.5 11.0 9.0 10.0 12.0 MAX - - - - - - - - - - - - PO(SAT) dBm RLin dB RLout Output Return Loss, dB ABSOLUTE MAXIMUM RATINGS1 SYMBOLS VCC ICC PD TA TSTG PIN PARAMETERS Supply Voltage2 UNITS V mA mW C C dBm RATINGS 3.6 60 270 -40 to +85 -55 to +150 +10 RECOMMENDED OPERATING CONDITIONS SYMBOLS VCC PARAMETERS Supply Voltage1 UNITS MIN V 2.7 TYP MAX 3.0 3.3 Total Cicuit Current Power Dissipation3 Operating Ambient Temperature Storage Temperature Input Power4 Note: 1. Same voltage applied to pins 4 and 6 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage. 2. TA = 25C, pins 4 and 6. 3. Mounted on a double-sided copper clad 50x50x1.6 mm epoxy glass PWB, TA = +85C. 4. TA = +25 C TYPICAL PERFORMANCE CURVES (Unless otherwise specified, TA = 25C) CIRCUIT CURRENT vs. SUPPLY VOLTAGE 40 No Signal 35 40 35 No Signal VCC = 3.0 V CIRCUIT CURRENT vs. OPERATING AMBIENT TEMPERATURE Circuit Current, ICC (mA) 30 25 20 15 10 5 0 0 1 2 3 4 Circuit Current, ICC (mA) 30 25 20 15 10 5 0 -60 -40 -20 0 +20 +40 +60 +80 +100 Supply Voltage, VCC (V) Operating Ambient Temperature, TA (C) UPC8181TB TYPICAL PERFORMANCE CURVES (Unless otherwise specified, TA = 25C) ISOLATION vs. FREQUENCY 0 VCC = 3.0 V INPUT RETURN LOSS, OUTPUT RETURN LOSS vs. FREQUENCY -5 VCC = 3.0 V Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dBm) RLin -10 Isolation, ISOL (dB) -20 -10 RLout -30 -40 0.1 0.3 1.0 3.0 -15 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) OUTPUT POWER vs. INPUT POWER +15 +10 +15 f = 0.9 GHz VCC = 3.0 V +10 OUTPUT POWER vs. INPUT POWER f = 1.9 GHz VCC = 3.0 V Output Power, POUT (dBm) Output Power, POUT (dBm) +5 0 +5 0 -5 -10 -15 -20 -25 -30 -50 -5 -10 -15 -20 -25 -30 -50 -40 -30 -20 -10 0 +10 -40 -30 -20 -10 0 +10 Input Power, PIN (dBm) Input Power, PIN (dBm) OUTPUT POWER vs. INPUT POWER +15 +10 SATURATED OUTPUT POWER vs. FREQUENCY +12 Saturated Output Power, PO(sat) (dBm) f = 2.4 GHz VCC = 3.0 V VCC = 3.3 V +10 VCC = 3.0 V +8 VCC = 2.7 V Output Power, POUT (dBm) +5 0 -5 -10 -15 -20 -25 -30 -50 +6 +4 +2 -40 -30 -20 -10 0 +10 0 0.1 0.3 1.0 3.0 Input Power, PIN (dBm) Frequency, f (GHz) UPC8181TB TYPICAL PERFORMANCE CURVES (Unless otherwise specified, TA = 25C) THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE 0 THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE 0 Third Order Intermodulation Distortion, IM3 (dBc) f1 = 900 MHz f2 = 902 MHz -10 Thirf Order Intermodulation Distortion, IM3 (dBc) f1 = 1900 MHz f2 = 1902 MHz -10 -20 VCC = 3.0 V -30 -20 VCC = 3.0 V -30 -40 -40 -50 -50 -60 -15 -10 -5 0 +5 +10 +15 -60 -15 -10 -5 0 +5 +10 Output Power of Each Tone, POUT (dBm) Output Power of Each Tone, POUT (dBm) THIRD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER OF EACH TONE 0 Thirf Order Intermodulation Distortion, IM3 (dBc) f1 = 2400 MHz f2 = 2402 MHz -10 -20 VCC = 3.0 V -30 -40 -50 -60 -15 -10 -5 0 +5 +10 Output Power of Each Tone, POUT (dBm) UPC8181TB TYPICAL SCATTERING PARAMETERS (TA = 25C) 0.1 G 4.0 G 2.0 G 3.0 G 1.0 G 4.0 G 3.0 G 0.1 G 1.0 G 2.0 G Coordinates in Ohms Frequency in GHz VCC = VOUT = 3.0 V, ICC = 23 S11 S22 VCC = VOUT = 3.0 V, ICC = 23.0 mA FREQUENCY GHz 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 MAG 0.452 0.467 0.470 0.460 0.438 0.415 0.397 0.395 0.399 0.404 0.396 0.394 0.385 0.368 0.347 0.335 0.327 0.328 0.327 0.325 0.316 0.295 0.288 0.291 0.303 0.317 0.335 0.349 0.347 0.345 0.341 0.331 0.323 0.311 0.302 0.289 0.266 0.253 0.238 0.238 0.244 S11 ANG -2.7 -5.7 -7.5 -9.3 -11.5 -14.7 -18.6 -22.4 -25.6 -28.1 -29.0 -28.5 -28.0 -28.8 -29.5 -30.9 -31.5 -31.2 -29.4 -29.4 -28.5 -29.4 -30.8 -34.1 -38.3 -41.1 -41.3 -41.0 -39.4 -43.2 -45.4 -47.9 -49.8 -52.1 -52.6 -54.9 -56.5 -61.5 -65.6 -70.7 -74.0 MAG 9.078 9.098 9.143 9.237 9.284 9.442 9.670 9.897 10.166 10.496 10.903 11.329 11.895 12.145 12.356 12.670 12.966 13.410 13.722 14.151 14.412 14.747 15.144 15.463 15.264 15.137 14.774 14.176 13.710 12.808 12.313 11.587 11.003 10.638 10.228 9.985 9.543 9.184 8.816 8.488 8.186 S21 ANG -2.0 -4.9 -6.9 -10.1 -11.9 -14.6 -17.0 -19.7 -22.7 -26.0 -29.0 -32.8 -37.9 -42.4 -47.6 -51.8 -56.4 -61.4 -66.8 -72.3 -78.1 -84.1 -90.3 -97.4 -104.6 -112.6 -119.8 -127.7 -133.7 -139.8 -146.0 -149.3 -154.5 -157.7 -162.0 -166.5 -170.1 -174.5 -177.7 178.2 174.3 MAG 0.020 0.021 0.021 0.021 0.021 0.022 0.022 0.022 0.023 0.022 0.023 0.025 0.025 0.024 0.025 0.026 0.024 0.026 0.027 0.026 0.028 0.027 0.029 0.029 0.029 0.028 0.029 0.031 0.029 0.029 0.031 0.029 0.031 0.031 0.029 0.030 0.030 0.031 0.030 0.032 0.032 S12 ANG 4.3 4.2 8.2 9.8 11.4 8.1 11.5 16.3 14.5 13.4 18.0 16.6 17.4 22.0 24.3 20.6 21.4 23.2 27.5 24.6 26.4 26.5 27.5 27.1 27.7 25.5 25.5 25.0 32.9 24.8 28.9 31.6 31.2 29.5 32.5 31.4 39.6 34.1 36.2 38.9 37.0 MAG 0.338 0.346 0.344 0.335 0.328 0.337 0.350 0.354 0.342 0.331 0.332 0.353 0.376 0.374 0.361 0.356 0.356 0.366 0.367 0.369 0.363 0.361 0.359 0.346 0.323 0.303 0.294 0.299 0.304 0.317 0.325 0.318 0.315 0.307 0.302 0.303 0.301 0.294 0.275 0.270 0.266 S22 ANG -1.6 -2.1 -1.0 -2.7 -4.8 -7.5 -7.9 -6.8 -6.0 -7.9 -10.8 -13.4 -14.3 -15.0 -16.3 -19.3 -22.0 -23.9 -25.6 -28.5 -31.7 -35.4 -37.1 -39.0 -40.6 -43.1 -43.9 -43.0 -41.3 -44.9 -46.7 -48.7 -52.1 -56.1 -60.0 -63.7 -65.1 -67.5 -68.8 -71.0 -75.1 K 1.89 1.73 1.72 1.75 1.84 1.73 1.72 1.69 1.56 1.60 1.48 1.33 1.26 1.28 1.28 1.22 1.29 1.17 1.11 1.11 1.05 1.08 1.02 1.01 1.04 1.09 1.07 1.03 1.09 1.15 1.13 1.25 1.27 1.32 1.44 1.47 1.54 1.55 1.71 1.70 1.75 UPC8181TB PIN FUNCTIONS (Pin Voltage is measured at VCC = 3.0 V) Pin No. 1 Pin Name INPUT Applied Voltage -- Pin Voltage 0.99 Description Signal input pin. An internal matching circuit, configured with resistors, enables 50 connection over a wide band. A multi- feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to signal source with capacitor for DC cut. GND pin. This pin should be connected to the system ground with minimuim inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to decrease impedance difference. Signal output pin. The inductor must be attached between VCC and output pins to supply current to the internal output transistors. Equivalent Circuit 6 2 3 5 GND 0 -- 4 1 4 OUTPUT Voltage as same as VCC through external inductor VCC 2.7 to 3.3 -- 3 -- Power supply pin, which biases the internal input transistor. This pin should be externally equipped with bypass capacitor to minimize its impedance. GND 2 GND 5 6 APPLICATION EXAMPLE (Digital Cellular Telephone) RX DEMO I Q /N SW PLL PLL I 0 TX PA Phase Shifter 90 : UPC8181TB Q UPC8181TB OUTLINE DIMENSIONS (Units in mm) 6-PIN SUPER MINIMOLD LEAD CONNECTIONS (Top View) (Bottom View) 2.1 0.1 1.25 0.1 +0.1 -0.05 3 0.2 C3E 4 5 6 4 5 6 3 2 1 0.65 2.0 0.2 1.3 2 1 0.65 0.1 MIN 0.9 0.1 0 to 0.1 1. 2. 3. 4. 5. 6. INPUT GND GND OUTPUT GND VCC 0.7 0.15 +0.1 -0.05 ORDERING INFORMATION PART NUMBER UPC8181TB-E3-A PACKAGE 6-pin super minimold QUANTITY 3kpcs/Reel Note: Embossed tape 8 mm wide. Pins 1,2,3 face tape perforation side. TEST CIRCUIT VCC 1000 pF C3 6 50 IN 51 pF 51 pF C1 1 4 100 nH C2 50 OUT APPLICATION BOARD Si MMIC AMPLIFIER J2 J1 RF IN 1 CXX L1 C1 U1 RF OUT C2 C3 2,3,5 Vcc GND P1 Note: 1. double sided copper clad GETEK board (H = .028, r = 4.2.) 2. Back side: GND pattern. 3. Solder plated on patterns. 4. o O : Through holes. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 DATA SUBJECT TO CHANGE WITHOUT NOTICE Internet: http://WWW.CEL.COM 02/15/2002 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of UPC8181TB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |